|
| Hi
mate,
I
am
wrestl
|
|
 |
|
 |
Hi mate, I am wrestling with the same plrboem of getting my leaky slave cylinder out crawled underneath it this morning removed rubber gaiter and got an eyefull of brake fluid .much cursing and blinking later got the circlip off and then liberal amounts of 3 in 1 and a copper mallet but no movement have ordered a rebuild kit a35 and am just going to keep topping it up until it arrives then I will use my coil spring compressor as you have and try and ease it out Slave cylinders for these are obsolete now so going to try and salvage it.. If you find a source for these let me know and I will do likewise.. I had my clutch relined in a day by JMC of poole for a323. Have had to weld a fair bit for last MoT and track down 1 front strut but otherwise the old girl is going well. I have a steering box and rear springs as spares if you need them and some light surrounds and rear lenses, got a complete centre armrest console aswell as I've fitted bench seats in it now. Good luck and regards. Sean. I have a parts list for corsair if you need any numbers (proper ford dealer parts list).
|
 |
|
 |
|
|
|
|
|
|
(VISITOR) AUTHOR'S NAME
Sanjay
MESSAGE TIMESTAMP
16 december 2014, 08:58:20
AUTHOR'S IP LOGGED
186.95.139.107
|
|
|
|
